Simple Hack Guide

==>All Maplestory Guide List<==

==>Maplestory Hacks List<==

Maple Story - MapleStory: Simple Hack Guide

OK. If you are here then im guessing you dont know how to hack or are having trouble with the program.

OK. Im pretty new to hacking, ive been hacking for about a month now. I have taught all my mates how to hack because hey what are friends for?

So i thought im proficent enough to teach the internet community. So im gonna try make it as simple as i can and if i could teach my half brain friends then you others can learn it pretty quickly. And remember if you have any questions post and ill try get back to you. Tho im not on the net 24/7.



Programs

Ok the programs i use and suggest you use are:

Bypass: ConByPass2

Engine: Kaspersky Engine (Maple Version)

To Make It into Windows Mode: DXWnd

Bot: MSBot 1.6.1



To Get These go to:

ByPass (ConByPass2): http://www.mpcforum.com/showthread.php?t=171280

Engine (Kaspersky): http://kaspersky.co.nr/ (Become a Member and In the homepage click the link in the bottom left)

Windows Mode (DXWnd): Will Be In the Kaspersky Folder

Bot (MSBot): Will Be In the Kaspersky Folder (under the name launcher)



Ok. Now that you have downloaded Kaspersky and ConByPass2 Make a folder called Hacks or Something.

Place the two programs in there extracted (make sure you have WinRar to extract them)



Short Explanation

Ok firstly DXWnd is a program that makes Maple go into windows mode and makes it alot easier to set up and use the hack tools. If the location of your maple story isnt in the default then right click the location that DXWnd shows and click add and find your maple then tick the "Directx8" and "emulate in 256 bit color" boxes and press Ok.

(leave this open)



Secondly Open MSBot 1.6.1 under the name launcher it is in the kaspersky folder. The programs auto loots, attacks and recovers HP and MP. When it is open click the triangle in the window and tick the "use alternate injection method" box Restart the bot if it asks you to.

(leave it running)



Third open ConByPass2 this will allow you to hack for longer and prevent you from d/c and your computer restarting.

(leave open)



Fourtly open 'Systemcallretriever.exe' its in the Kaspersky folder you must run this before you open Kaspersky engine, i do this everytime i restart my computer.

It will take from 5seconds to 2minutes depending on your computer and press "OK" for anything that comes up.

(run once per time you turn on your computer)



Lastly your engine, Kaspersky open this this will allow you to hack maple.

(leave it open and running)



Settings for Kaspersky Engine:



General Settings:

Tick Everything - Except the last one



Scan Settings:

[ ] Fast scan on by default

[x] Enable hyperscan when possible

[ ] Don't scan memory that is protected with the No Cache Option

[ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan



[x] MEM_PRIVATE

[x] MEM_IMAGE

[ ] MEM_MAPPED

[X] Run scan in separate thread.





File Associations:

Tick Nothing



Code Finder:

[x] Use Debug Registers

[ ] Memory Access Exceptions

[x]Try to prevent detection of the debugger

[ ] Handle breakpoints not caused by CE



Assembler:

[x] Show disassembler

[x] Show debugger options

[x] Use hardware breakpoints

[ ] Use int3 instructions for breakpoints

[x] Replace incomplete opcodes with nops

[x] Ask for replace with nop

[x] Try to prevent detection of the debugger



Extra

[ ] Query memory region routines

[X] Read/Write Process Memory

[X] Open Process



[ ] Undo changes to CE

[ ] Force memory to be writable in case the standard method is blocked



[X] Enable use of the Process Watcher

[X] User kernelmode debugger options when possible



[ ] Stealth Mode (Usermode)

[X] Stealth Mode (Kernelmode) [MORE] - [X] Prevent all modules [ ] Allow all modules



[The x means you tick that box]



Next Step

Now that you have fixed the settings opened up 'Systemcallretriever.exe' opened Kaspersky Engine, ConByPass2, DXWnd and MSBot 1.6.1(Launcher) in Kaspersky engine press CTRL + O or click the middle button on the top left of Kaspersky Engine Screen and Open the file "kaspersky.ct" Then in DXWnd double click your Maple Story program it should look something like this: "C\ProgramFiles\Wizet\Maplestory\Maplestory.ex e" the MSBot screen should disapear without a message that means it has attached to maple and its running fine. If a message comes up close maple and open launcher again from the kaspersky folder.

Now let maple open up and log in. Take your character to a safe place on the map or into a shop.



Hacking (The fun easy Part)

Ok now you are ready to hack thats what you came for isnt it.

Minimize maple and Maximize the kaspersky engine. when it is open click the "trainers" button on the middle right and go to "GMS" this is were the pre programed hacks are the main 2 are 'full godmode' and 'super tubi'. Godmode prevents you from getting hit and super tubi helps you pick up items very quickly.



Tick the 'full godmode' and 'super tubi' boxes for now, you can experiement with the rest later.

press "ok" and "ok" now when you go back to maple you may get hit once and then the rest of the monsters cannot hit you. And try to pick up a group of items.



Now, the first two addresses that were loaded with your Cheat Table, are Unlimited attack, and no breath. Freeze them, by pressing the boxes in front of the address. And for unlimited attack, double click the value, and change it to 90.

That lets you attack non-stop unlike the normal 100 hits.



Hacking (the harder funner part)

Ok. Now you want the hit any monster on the screen hack or otherwise know as DemiVac and the screen item collecting one otherwise know as ItemVac.

Ok DemiVac First:

Code:

[ENABLE]

registersymbol(rangeX)

registersymbol(rangeY)

alloc(rangeX,64)

alloc(rangeY,128)

rangeX:

mov edx,[773E7C]

lea edx,[edx+390]

mov ecx,[edx]

jmp rangeY

rangeY:

mov edx,[773E7C]

lea edx,[edx+394]

lea eax,[edx]

mov eax,[eax]

jmp 00517A43

[DISABLE]

unregistersymbol(rangeX)

unregistersymbol(rangeY)

dealloc(rangeX,64)

dealloc(rangeY,128)

Copy the text in the grey box.

now go to kaspersky engine and click "auto assemble"

paste the code in the next box that comes up and then press "file" and "assign to current cheat table"



Now close that box by pressing the X in the top right corner (not the engine just the auto assemble box)

now you should see a new entry in the box at the bottom called 'auto assemble' (if you dont scroll down using the bar, it should be at the bottom) freeze it by clicking the box on its left. Now in the engine click 'add address manually'

a long box comes up. In address type 'rangex' (type it over the numbers or letters that come up) and in descritption type 'rangex' (over the text that comes up) now click "ok"

now another address should be in the box at the bottom if you dont see it scroll down.



Now look at the 'rangex' entry in the address colum there is a number get a pen and paper and write that number down.

is should be 8 digits with four number 0's at the end.

Now that you have this number go to (click) "memory view"

in the kaspersky engine and press CTRL + G and type in the following: 00517A34 it will take you to a row right click the highlighted row and click "change resister at this location"



Now a smaller box should come up in this box look for the one that has EIP and a box next to it check (tick) this box and type in the number you wrote down from the 'rangex' address. Now press "ok" and close the memory view box.

now go back to maple and you will hit the monster in your area (make sure 'full godmode' is on or all the monster will be hitting you) thats the first part complete.



Ok now to add ItemVac

Copy the following code that is in the grey box.

Code:

alloc(code, 1024)

code:

pushad

mov ecx, [ebp+8]

mov ebx, [ebp-24]

mov [ecx], ebx

mov [ecx+4], eax

mov ecx, eax

mov eax, ebx

lea edx,[eax-19]

mov [ebp-34], edx

lea edx, [ecx-32]

add eax, 19

add ecx, A

mov [ebp-30], edx

mov [ebp-2C], eax

mov [ebp-28], ecx

popad

push eax

jmp 0048ED03

Ok now click "auto assemble" and paste this code inside that. press write code and a message will come up. Press "ok" for the first one but for the second one write down the number (on a peice of paper or something) that comes up. Now press "ok" for that window and close the "auto assemble" box.



Now press (click) "memory view" and press CTRL + G

type in the following number 48ED02

and right click the highlighted colum and click "change resister at this location" and tick the EIP box and type in the number you had written down in the text box next to EIP.

Now click "ok" and close memory viewer.

Now, when you press the pick up button, all of the items in the map, will be vaced to you.



AND YOU ARE SET.



Now, with MsBot, it will help you pick up, Use potions, and or attack with out pressing anything manually. To set up the auto potter, hover your mouse over your mp, where you want it to use a potion and press 3 on your number pad. Do the same with your hp, but press 2.



**Make sure your Hp pots are on NUM 9 and your Mp Pots are on NUM 0.(this needs pots to pot for you, if you run out of pots you will stop attacking unless your attack doesnt need HP or MP)

Press 1, and it should start to pot for you.



Press F10, and it will pick up for you.

Press F11, and it will constantly press Ctrl. Make sure your main attack is on it.





*Sorry if there are any errors from spelling to code please i f you notice anything post or message me. Thanks.

==>All Maplestory Guide List<==

==>Maplestory Hacks List<==